氮氣迴焊爐(含氧氣分析儀) TUKY-5200N2(20區軌道 20 rails) Nitrogen reflow oven (with oxygen analyzer)
規格 Specification
A. 主電源控制箱 The main power control box
1. 輸入總電源 Enter the total power
3∮220V/380V.50/60Hz 62KW (可指定電壓) 3∮220V/380V.50/60Hz 62KW (Specify voltage)
2. 冷卻風扇控制器 The cooling fan controller
3. 總電源控制器 The total power controller
4. 自動關機按鈕 Automatic shutdown button
5. 緊急關機按鈕 Emergency shutdown button
6. UPS不斷電系統750W Uninterruptible Power System 750W
B. 輸送軌道Conveyor Track
1.輸送軌道寬度The width of conveyor track 330㎜
2.速度範圍Speed range 300~1800㎜/min
3.電力Power 無段變速馬達.1∮220V/380V 60W Variable speed motor1∮220V/380V 60W
4. 速度:數字設定.顯示. Digital setting. Displayed.
C. 預熱及熔錫區Preheating and Melting Zone
1. 溫度控制Temperature Control PID微電腦及SSR控溫系統 Microcomputer PID and SSR temperature control system
2. 溫度範圍 Temperature Range 室溫~350 ℃. Ambient~350 ℃.
3. 溫度控制區 Temperature Control Area 上十區加熱系統、下十區加熱系統. The ten districts the heating system Under ten districts the heating system
D.冷卻區 Cooling Unit 對流式助焊劑過濾回收系統 Convective flux filter recovery system
E.機體尺寸 Dimensions MM L 5870㎜X W 1070㎜X H 1350㎜
F.安全裝置 Safety Device
1.訊號警示燈.Signal Warning Lights
2.停電時UPS自動開啟,輸送帶自動啟動 When power is turned off UPS will automatically turn on, the conveyor also starts to work.
G.含氧氣分析儀(選擇配備) Containing oxygen analyzer (option)
H.溫度模組Temperature Module 溫度,速度,風速叫出直接執行 Temperature, speed and wind speed can be directly implemented
I.PCB板進入爐內顯示位置,片數,停電時記憶系統(劃面看得到) When the PCB board enter the furnace it will show position, number of pieces and also have memory system when power outage .(Show the image)
J.故障警報時,電腦系統警報顯示故障原因,日期,時間 可記憶 When failure alarm ,computer alarm system will show the cause, date and time .(memory property)
K.塞板警報0-60S Alarm 0-60S
|